Datalogic CBX800 Fixed Barcode Scanner Connection Box

Datalogic CBX800 Fixed Barcode Scanner Connection Box

The CBX series is a connectivity device designed to simplify and speed-up cabling operations during the installation of Datalogic Automation devices. Thanks to its modular concept and the complete range of optional modules, any installation, configuration and maintenance operation is now accomplished faster than ever.



  • Serial to Fieldbus, Ethernet TCP/IP or ID-NET™ industrial gateway
  • Open architecture allows flexible interfacing to Ethernet TCP/IP, Profibus, DeviceNet, Ethernet/IP and other common networks
  • Flexible mounting and simplified wiring to speed up the installation
  • Visible Power, Communication and I/O indicators and Power On/Off switch
  • IP65 (NEMA 4) rated industrial design
  • Multi-language Genius™ SW Tool allows rapid device configuration



The CBX800 is an industrial gateway allowing connection of devices equipped with a standard RS232 communication interface to the most common fieldbus systems, by means of a complete range of optional modules, and to ID-NET™ high speed communication network. CBX 800 allows, with same model, flexibile interfacing of several devices (e.g. Datalogic Automations 6K and 8K series, handheld readers) to different networks.

Three serial ports and high speed ID-NET™ communication interface, always available, can be combined with a complete range of of optional modules providing connectivity to standard Ethernet TCP/IP network or to the most common fieldbus systems


Modular and flexible industrial gateway designed to interface devices equipped with a standard RS232 communication port to several networks (e.g. Ethernet TCP/IP, industrial Fieldbus systems, ID-NET™).

Extended connectivity to satisfy all the most common demands. Installation is simplified thanks to accessible through holes for mounting screws with closed box. Pinout standardization simplifies wiring to the appropriate terminal block IP65 (NEMA 4) protection class and 0 to 50 °C (32 to 122 °F) operating temperature.


  • Manufacturing
  • Shop Floor
  • Warehousing



  • 1D / Laser Barcode Scanners:
    DS2100N, DS2400N, DS4800, DS6300, DS6400, DX6400, DS8100A, DX8200A
  • 2D / Imager Barcode Scanners:
    MATRIX-2000™, MATRIX 210™, MATRIX 300™ MATRIX 410™
    Message fragmentation and flow control
    Address Setting:
    HW Switches, Genius™


  • Communication Protocol:
    Datalogic Application Driver (DAD Driver)
  • Communication interfaces Auxiliary:
    RS232 up to 115.2 Kbit/s
  • Host Interface:
    RS232/RS485 up to 115.2 Kbit/s
    ID-NET™ port up to 1 Mbps
    Optional Host Interface modules
    Display and Keypad:
    20 x 4 characters & 3 keys
  • Diagnostic LEDs:
    Power On/Polarity Error, Trigger, IN2, OUT1, OUT2, Ready, Host Interface 1, Host Interface 2, ID-NET, OUT3
  • Exchange Memory for I/O Data:
    Up to 128 Bytes
  • Vibration Resistance:
    EN 60068-2-6 1.5mm; 10 to 55 Hz; 2 hours on each axis
  • Shock Resistance:
    EN 60068-2-27 30G; 11ms; 3 shocks on each axis
  • Dimensions:
    193 x 180 x 71 mm (7.60 x 7.09 x 2.79 in.)
  • Weight:
    830 g. (29.28 oz.)
  • Operating Temperature:
    0 to 50 °C (32 to 122 °F)
  • Storage Temperature:
    -20 to 70 °C (-4 to 158 °F)
  • Humidity:
    90% non condensing
  • Protection Class:
  • Power Supply:
    10 to 30 VDC
  • Power Consumption:
    2.5 W max

Connection boxes (cbox) / Controllers

Required on all fixed mount scanning unless Quicklink Series connections are used. Please specify additional outputs if required and adapters.

Output Modules

Optional (only required on certain models), only works with CBX500 & CBX800 connection boxes.

Power Supplies/Cords

Additional Accessory – only required for certain cable sets.

No products were found matching your selection.

EASE OF CARE (EoC) Repair/ Maintenance Agreements (Per Unit)

Optional on request.